ramynasim
New member
- إنضم
- 14 نوفمبر 2006
- المشاركات
- 23
- مستوى التفاعل
- 0
- النقاط
- 0
Nokia 3110Classic RAPGSM v1.1 PA
Nokia 3250 RAGGSM v1.1 PA
Nokia 5200 RAPGSM v1.1 PA
Nokia 5300 RAPGSM v1.1 PA
Nokia 6085 RAPGSM v1.1 PA
Nokia 6110Navigator RAPIDO v1.12 PA
Nokia 6136 RAPGSM v1.1 PA
Nokia 6270 RAGGSM v1.1 PA
Nokia 6300 RAPGSM v1.1 PA
Nokia 6630 RAP3G v2.10E PA
Nokia 6680 RAP3G v2.0E PA
Nokia 6681 RAP3G v2.0E PA
Nokia 7370 RAPGSM v1.1 PA
Nokia E50 RAPGSM v1.1 PA
Nokia E60 RAP3G v2.20E PA
Nokia E62 RAPGSM v1.1 PA
Nokia E65 RAP3G v2.20E PA
Nokia E70 RAP3G v2.20E PA
Nokia N70 RAP3G v2.20 PA
Nokia N71 RAP3G v2.20 PA
Nokia N72 RAP v2.21E PA
Nokia N73 RAP3GS v2.0E
Nokia N80 RAP3GS v2.0E PA
Nokia N90 RAP3G v2.11 PA
Nokia N91 RAP3G v2.20E PA
Nokia N93 RAP3GS v2.0E PA
Nokia N93i CEBBO2P (RAP3GS)
Nokia N95 RAPIDO v1.11 PA
the program is attached with this post , download and use for free
about the steps u will find it here
For this program you need Fbus cable like DK5 to be connected as from COM1 to COM9
Dawnload From Here
http://www.actgsm.com/act/bb5.zip:999:
First unpack zip fiole and strat install.bat
In file "c:\bb5_unlocker\logs\bb5_unlocker.cfg" with any ---- editor change your COM port setings as it is found after connecting the phone to the computer using dku5 cable
take in concederation that it must be from com 1 to com 9
u can use the device manager to change ur com port if it was out of this range
how to use the program
Program can be started successfully only if is COM port in file
"c:\bb5_unlocker\logs\bb5_unlocker.cfg" adjusted properly.
READ PHONE:
Reading info data from phone and making BACKUP file for that phone( Field 308,1).
IMPORTANT DO NOT delete or modify that file because can save your ----* if something goes wrong.
WR BACKUP:
With that function can write backup file with Field 308,1 if exist in BACKUP folder.
MAKE LOG:
Function for making log file . With that log file BB5_calc.exe calculating codes for unlock.
Working with BB5 phones with RAP3G v.2.x (6630,6680,6681,6682,n70,n90).
IMPORTANT phone must be without Sim card.
SP UNLOCK:
Making unlock with codes calculated by BB5_calc.exe.
SP UNLOCK PROCEDURE
Connect cable to PC and be shure com port is adjusted properly
Start BB5logunlocker.exe
Connect phone and switch on without Sim card.
press button READ PHONE and wait until get the message DONE.
If is everything correct you will see info from phone on ***een.
Pres button make log and wait until get mesage done.
Log file is in folder LOGS.
Start BB5_calc.exe to make for you PSW file in folder PSW
Press button SP UNLOCK and unlock your phone.
If you got unlock codes from your provider and you used all yours 3 attempts
to enter code via keypad then do the following:
into dir "c:\bb5_unlocker\psw" create a file "aaaaaaaaaaaaaaa_BB5.psw" where is "aaaaaaaaaaaaaaa" enter your phones imei
then in that created file enter in the files start "#pw+bbbbbbbbbbbbbbb+c#" where is "bbbbbbbbbbbbbbb"
enter your unlock code and where is "c" enter your logs level number (1-7).
save the file and use "SP UNLOCK" function
and we r making another explanation with pictures which will be more easy for all and will post it tomorow here
by the end , sory because I don't have arabic keyboard installed to my computer
best wishes to all
Nokia 3250 RAGGSM v1.1 PA
Nokia 5200 RAPGSM v1.1 PA
Nokia 5300 RAPGSM v1.1 PA
Nokia 6085 RAPGSM v1.1 PA
Nokia 6110Navigator RAPIDO v1.12 PA
Nokia 6136 RAPGSM v1.1 PA
Nokia 6270 RAGGSM v1.1 PA
Nokia 6300 RAPGSM v1.1 PA
Nokia 6630 RAP3G v2.10E PA
Nokia 6680 RAP3G v2.0E PA
Nokia 6681 RAP3G v2.0E PA
Nokia 7370 RAPGSM v1.1 PA
Nokia E50 RAPGSM v1.1 PA
Nokia E60 RAP3G v2.20E PA
Nokia E62 RAPGSM v1.1 PA
Nokia E65 RAP3G v2.20E PA
Nokia E70 RAP3G v2.20E PA
Nokia N70 RAP3G v2.20 PA
Nokia N71 RAP3G v2.20 PA
Nokia N72 RAP v2.21E PA
Nokia N73 RAP3GS v2.0E
Nokia N80 RAP3GS v2.0E PA
Nokia N90 RAP3G v2.11 PA
Nokia N91 RAP3G v2.20E PA
Nokia N93 RAP3GS v2.0E PA
Nokia N93i CEBBO2P (RAP3GS)
Nokia N95 RAPIDO v1.11 PA
the program is attached with this post , download and use for free
about the steps u will find it here
For this program you need Fbus cable like DK5 to be connected as from COM1 to COM9
Dawnload From Here
http://www.actgsm.com/act/bb5.zip:999:
First unpack zip fiole and strat install.bat
In file "c:\bb5_unlocker\logs\bb5_unlocker.cfg" with any ---- editor change your COM port setings as it is found after connecting the phone to the computer using dku5 cable
take in concederation that it must be from com 1 to com 9
u can use the device manager to change ur com port if it was out of this range
how to use the program
Program can be started successfully only if is COM port in file
"c:\bb5_unlocker\logs\bb5_unlocker.cfg" adjusted properly.
READ PHONE:
Reading info data from phone and making BACKUP file for that phone( Field 308,1).
IMPORTANT DO NOT delete or modify that file because can save your ----* if something goes wrong.
WR BACKUP:
With that function can write backup file with Field 308,1 if exist in BACKUP folder.
MAKE LOG:
Function for making log file . With that log file BB5_calc.exe calculating codes for unlock.
Working with BB5 phones with RAP3G v.2.x (6630,6680,6681,6682,n70,n90).
IMPORTANT phone must be without Sim card.
SP UNLOCK:
Making unlock with codes calculated by BB5_calc.exe.
SP UNLOCK PROCEDURE
Connect cable to PC and be shure com port is adjusted properly
Start BB5logunlocker.exe
Connect phone and switch on without Sim card.
press button READ PHONE and wait until get the message DONE.
If is everything correct you will see info from phone on ***een.
Pres button make log and wait until get mesage done.
Log file is in folder LOGS.
Start BB5_calc.exe to make for you PSW file in folder PSW
Press button SP UNLOCK and unlock your phone.
If you got unlock codes from your provider and you used all yours 3 attempts
to enter code via keypad then do the following:
into dir "c:\bb5_unlocker\psw" create a file "aaaaaaaaaaaaaaa_BB5.psw" where is "aaaaaaaaaaaaaaa" enter your phones imei
then in that created file enter in the files start "#pw+bbbbbbbbbbbbbbb+c#" where is "bbbbbbbbbbbbbbb"
enter your unlock code and where is "c" enter your logs level number (1-7).
save the file and use "SP UNLOCK" function
and we r making another explanation with pictures which will be more easy for all and will post it tomorow here
by the end , sory because I don't have arabic keyboard installed to my computer
best wishes to all